Miomare VS3L User Manual download pdf (Page 10)

13 GB / MT

poses a risk of fatal accident and injury.

The product must not be used as an aid for getting into the

bathtub. This poses a risk of fatal accident and injury.

Make sure that you do not injure yourself by getting trapped

when using the product. This poses a risk of injury.

Caution:

The product must only be used with the supplied original

parts. Otherwise there is a risk of damage.

Before assembly and initial use of the product, check that

the delivery is complete and undamaged. Otherwise there is

a risk of damage as a result of improper use.

Check before initial use of the product that all components

are assembled in accordance with the instruction manual.

Otherwise there is a risk of damage.

The product must not be used for storage purposes. Other-

wise there is a risk of damage.

Take care not to cause general damage when drilling the

mounting holes in the wall tiles.

Prevent discoloration of and damage to the folding bathtub

screen. Do not use bleaching agents, aggressive cleaning

and scouring agents, solvents or cleaning agents containing

acetone and chlorine for cleaning purposes.

The product must only be repaired by an authorized and

skilled specialist. Otherwise there is a risk of damage and

loss of the warranty.

Installation

Do not damage any gas, electricity, water, oil or telecom-

munication lines when fitting the product on the wall. This

poses a risk of fatal accident and injury.

Check the conditions relating to bathroom installations in

your lease agreement.

• Clear space around bathtub.

• Use masking tape to tape up the areas next to the silicone

filling.

• Smooth the surface of the silicone filling with a mixture of

washing-up liquid dissolved in tap water. Dip the tip of your

finger into the mixture and smooth it over the silicone and

repeat if necessary.

The three opening elements are aligned with the wall connection

profile either for left or right-hand installation. Position the fold-

ing screen as required by turning it by 180°.

You will need the following materials for

installation

· Felt-tip pen

· Pencil

· Tape measure

· Spirit level

· Slotted screw driver

· Hammer drill

· Rock drill with 8 mm diameter

· Moisture-proof silicone, approx. 80 g

· Mixture of: washing-up liquid dissolved in approx. 100 ml

tap water

· Crepe adhesive tape

• Unpack all the parts and check that they are undamaged

and complete.

• Decide on the installation position of the folding screen.

• Make sure when choosing the installation position that

fittings, taps, handles for getting in and out of the bathtub,

sloping ceilings or projecting walls will not hinder opening

and closing of the folding screen.

See Fig. B:

• Screw the 3 fastening screws

with the 3 washers

completely out of the screw threads of the wall connection

profile

• Remove the wall connection profile from the frame profile of

the outside folding screen element.

See Fig. C:

• Hold the wall connection profile together with the spirit level

vertically on the wall. The wall connection profile must be in

the centre of the edge of the bathtub.

• Mark the 3 drill holes on the wall with the felt-tip pen (tiles)

or the pencil (joints).

See Fig. D:

• Drill the 3 holes for mounting the folding bathtub screen.

Use a 8 mm diameter rock drill to do this.

First drill the holes to a depth of approx. 5 mm at slow

speed, then increase the speed and continue drilling to a

depth of approx. 50 mm. Take care that you do not cause

any general damage to the wall material.

• Insert the 3 dowels

flush into the drilled holes.

See Fig. E:

• Screw the wall connection profile with the 3 fastening

screws

in the dowels so that it is tight and flush.

See Fig. F:

The following steps apply to both left and right-hand

installation. See also Fig. A.

•

elements.

• Fit the 3 upper plastic seals

into the groove on the upper

edges of the 3 folding screen elements so that they fit

correctly.

Please note that the plastic seals must be inserted in the

groove with the ends first.

• In the area of the joints (grey plastic cover) make sure that

the seals outside the groove lie straight on the upper or

lower edge.

• Then fit the 3 lower plastic seals

into the groove on the

bottom edges of the 3 folding screen elements so that they

Safety Installation

BA_Faltw_Kö469_content.indd 13 23.09.2005 15:50:47 Uhr

metres shown in Fig. F for the individual folding screen

Choose the plastic seals according to the sizes in mili-

Folding bathtub screen VS3L

Introduction

Please read these operating instructions thoroughly and care-

fully. Open out the pages showing the illustrations and figures.

These instructions are part of this product and contain important

information relating to initial use and handling. Please always

observe all safety instructions.

If you have any questions please contact the service office.

Please keep these instructions in a safe place and pass them on

to anyone else as necessary.

Product description and proper use

The 3-part folding bathtub screen is suitable for wall mounting

and for private use in enclosed bathrooms only. The three folding

elements can be opened out on rectangular acrylic bathtubs,

steel bathtubs, cast iron bathtubs, including hydro massage

bathtubs, to form a plane screen wall. Any other use or modifica-

tion of the product constitutes improper use and poses a serious

risk of accident. The manufacturer is not liable for damage

caused by improper use or incorrect handling of the product.

Delivery scope

Please check immediately after unpacking that the delivery

scope (see also Figure A) is complete and that all the individual

parts are in perfect condition.

1 x folding bathtub screen, 3-part

3 x upper plastic seals

3 x lower plastic seals

3 x steel screws, 4 x 40 mm, stainless

3 x 8 mm diameter dowels

Equipment

The 3-part folding bathtub screen VS3L has the features shown

below.

Folding bathtub screen, 3-part

Upper plastic seals

Lower plastic seals

Wall connection profile

Fastening screws

Plain washers

Fastening material

Steel screws 4 x 40 mm, stainless

8 mm diameter dowels

Technical data

Material:

Wall connection profile: aluminium

Frame profile: aluminium

Panel areas: plastic

Seals: plastic

Dimensions:

Opened: (w) 1400 x (l) 1270 mm x (d) 30 mm

(incl. seals)

Closed: (w) 1400 x (l) 450 x (d) 72 mm

Glass thickness:

Thickness of aluminium

frame with glass: 14 mm

Depth of wall connection

profile: 30 mm

Weight: approx. 7080 g

Safety

Safety instructions

The following instructions are for your own safety and satisfac-

tion when using the folding bathtub screen. Please note that

non-compliance with these safety instructions can lead to a

serious risk of accident.

Explanation of symbols and terms used:

Dangerous voltage: failure to observe this instruction

endangers life and health.

Failure to observe this instruction endangers property.

Following this advice will help you to achieve optimal

results.

Danger:

Do not leave small children unsupervised with the packag-

ing material. There is a risk of fatal accident by suffocation.

Do not leave children unsupervised with the product. There

is a risk of fatal accident and injury.

Make sure before connecting the hammer drill to the mains

power supply that the mains electricity is 230 V ~ 50 Hz

in accordance with regulations and is equipped with a 16

ampere fuse. There is otherwise a risk of fatal accident by

electric shock. Please also read the operating and safety

instructions for your drill.

Installation must be carried out in dry conditions, protected

from moisture. There is otherwise a risk of fatal accident

and injury.

Do not damage any gas, electricity, water, oil or telecommu-

nication lines when installing the product on the wall. This

Introduction Safety

BA_Faltw_Kö469_content.indd 12 23.09.2005 15:50:47 Uhr

2 mm

12 GB / MT

1 x hexagonal spanner

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 69 70

Comments to this Manuals

No comments

Miomare VS3L User Manual Page 10

Comments to this Manuals

Related products and manuals for For Home Miomare VS3L