Miomare VS3L User Manual download pdf (Page 12)

15 GB / MT

Service

If you have any queries, please contact our service office.

Here you will receive all necessary information regard-

ing service questions such as returns, etc.

� 00800/01928321

Ravak a.s.

Obecnicka 285

26181 Příbram 1, ČR

Declaration of conformity

This product satisfies the requirements of the valid European and

national directives

Its conformity has been verified. The appropriate declarations

and documents are retained by the manufacturer.

Ravak a.s., Obecnicka 285, 26181 Příbram 1, ČR

EN 14428

Folding bathtub screen/

shower screen with plastic panels

Cleanability: passed

Breaking properties: passed

Durability: passed

Warranty / Service

BA_Faltw_Kö469_content.indd 15 23.09.2005 15:50:48 Uhr

fit correctly. The broad drain-off lips must point towards the

bathtub.

See Fig. G:

• Level out any uneven areas between the wall connection

profile and the edge of the bath with silicone.

• Insert the folding bathtub screen fully in the wall connection

profile. Take care that it is installed correctly – the smooth

side of the plastic panel must be on the inside / the rough

side of the plastic panel on the outside.

• Guide the 3 fastening screws

with the 3 washers

through the outer folding screen element.

• Screw the 3 fastening screws gently into the thread of the

wall connection profile – do not screw them tight.

See Fig. H:

• Open the folding screen fully along the edge of the bath.

• Position the folding screen so that the lower plastic seals

are lying exactly parallel on the edge of the bath.

• Screw the 3 fastening screws with the 3 washers tight into

the screw threads of the outer element.

• Make sure that the folding screen is positioned exactly par-

allel on the edge of the bath when open and flush against

the wall when closed.

• Position the folding screen exactly. If necessary, loosen the

fastening screws and screw them back on after aligning the

folding screen.

See Fig. I:

Note: on smooth walls it is not necessary to use silicone be-

tween the wall connection profile and the wall.

Level out uneven areas with silicone as follows:

• Fill the gaps between the inner and outer side of the wall

connection profile and the wall with silicone along the full

length.

• Fill the gaps between the frame profile of the outer fold-

ing screen elements and the wall connection profile with

silicone to a height of 100 mm.

Before you can use the folding bathtub screen, the silicone filling

must have set completely. Please observe the manufacturer's

information with regard to the setting time of the silicone used.

Use

You can use the folding screen as a splash guard on the bathtub

for showering. You can open out and close the folding screen

from the outside or inside of the bath.

Opening the folding screen

• Open out the folding screen fully so that it runs parallel on

the edge of the bath.

Closing the folding screen

• Close the folding screen so that it is flush against the wall.

Cleaning and maintenance

• The folding bathtub screen requires no maintenance.

• After showering, rinse any remaining care products off the

open folding screen into the bath with water.

• Remove the remaining drops of water from the plastic pan-

els of the folding screen with a standard rubber scraper.

• Remove the remaining drops of water from the wall connec-

tion profile and the frame profiles of the folding screen with

a soft cloth.

• Remove any dirt with a cloth and a standard pH-neutral

cleaning agent.

• Prevent discoloration of and damage to the folding bathtub

screen. Do not use bleaching agents, aggressive cleaning

and scouring agents, solvents or cleaning agents containing

acetone and chlorine for cleaning purposes.

• If you have removed the folding bathtub screen, it should be

kept clean and dry at room temperature in the original pack-

ing.

Disposal

Please dispose of any unwanted packaging material at a local

disposal facility. The recyclable packaging materials have been

selected for their ecologically compatible and disposable proper-

ties.

Please contact your district or city council with regard to pos-

sibilities for disposing of the folding bathtub screen once it has

served its useful life.

In this way you are complying with legal requirements and con-

tributing to protecting the environment.

Warranty / Service

Warranty

This product has a warranty of 2 years from the date of pur-

chase. The product was manufactured with care and inspected

thoroughly before delivery. Please keep your receipt as proof of

purchase.

If you have a claim under the warranty, please call the service

office for your country. This is the only way to ensure that your

device can be sent in free of charge.

This warranty covers material or manufacturing defects only.

Never use the product for any purpose other than that for which

it was intended. Do not carry out any work or modification your-

self, since you will otherwise lose your right to claim under the

warranty. This warranty does not restrict your statutory rights.

Installation Use Cleaning and maintance Disposal Warranty / Service

BA_Faltw_Kö469_content.indd 14 23.09.2005 15:50:47 Uhr

14 GB / MT

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 69 70

Comments to this Manuals

No comments

Miomare VS3L User Manual Page 12

Comments to this Manuals

Related products and manuals for For Home Miomare VS3L